BiTLAN®S/FTP cat.7A LSOH B2ca 1200 MHz

Halogen-free, data transmission cable, screened

Indoor application

Vertical flame propagation for a single cable (EN 60332-1-2)

Vertical flame spread of vertically-mounted bunched cables (EN 60332-3)

Halogen-free (EN 60754)

Low smoke emission (EN 61034)

Data transmission

B2ca

Technical data Application Products

Basic

Type: LAN cables
Operating voltage: 150 V
Voltage test: AC 50 Hz: 700 V # DC: 1000 V
Insulation resistance: 2 GΩ x km
Capacity: 45 ± 5 nF/km

Operating temperature

fixed installation from: -30°C
fixed installation up to: 70°C
Minimum installation temperature: -10°C

DC loop resistance at 20 °C (max): 125 Ω/km
Resistance unbalance within a pair: ≤ 2%
Capacitance unbalance pair to ground at 1 kHz (max):
1600 pF/km
Characteristic impedance at 100 MHz: 100 ± 5 Ω

Cable construction

Conductor material: copper wires
Core construction: Single-wire conductor
Insulation type: PE
Screen: foil screen, braided screen, double screen
Core arrangement: paired/triple/quadruple cable
Sheath type: LSOH
Sheath color: orange

Fire and functional properties

Halogen-free, Low smoke emission EN 61034
Fire classification: B2ca

Flame retardant

For a single insulated cable, For vertically-mounted bunched cables

Installation conditions

Internal application
Safety systems: BMS

BiTLAN S/FTP cat.7A 1200MHz LSOH B2ca cables are applicable to computer networks with operating frequency band up to 1200MHz. Suitable for transmission of data, audio and video signals, with bitrate up to 10Gb/s. Cables meet the requirements of category 7A in 1÷1000 range for fixed installations within indoor structured cabling systems as per EN 50173-1, ISO/IEC 11801, IEC 61156-5 standards and are tested up to 1200 MHz range for information purposes. Common and individual shielding additionally improves the teletransmission parameters and protects against external electromagnetic interferences and crosstalks between the pairs therefore cables can be used in industrial networks. Cables with flame retardant LSOH outer sheath ensuring low smoke emission acc. to EN 50268, IEC 61034-1(2) and limited emission of corrosive gases acc. to EN 50267, IEC 60754-2, should be installed in places with increased fire safety requirements. Cables classified according to EN 50575 (CPR).