BiTLAN®F/UTP PATCHCORD cat.5e 200 MHz

Data transmission patchcord cable, screened

Indoor application

Vertical flame propagation for a single cable (EN 60332-1-2)

Data transmission

Technical data Application Products

Basic

Type: LAN cables
Voltage test: AC 50 Hz: 700 V # DC: 1000 V
Insulation resistance: 5 GΩ x km
Capacity: at 1 kHz: 50 ± 5 nF/km

Operating temperature

fixed installation from: -30°C
fixed installation up to: 70°C
Minimum installation temperature: -10°C

DC loop resistance at 20 °C (max): 260 Ω/km
Resistance unbalance within a pair: ≤ 2 %
Capacitance unbalance pair to ground at 1kHz (max): 1600 pF/km
Characteristic impedance at 100 MHz: 100 ± 5 Ω

Cable construction

Conductor material: copper wires
Insulation type: PE
Screen: foil screen
Core arrangement: paired/triple/quadruple cable
Sheath type: PVC
Sheath color: grey

Flame retardant

For a single insulated cable

Installation conditions

Internal application

BiTLAN U/UTP PATCHCORD cat. 5e are designed for use in computer networks in frequency range up to 200MHz, with binary bandwidth up to 1Gb/s. Additional collective Al/Pet screen with CuS drain wire acts as a protection against external electromagnetic interferences. The cables are used to connect computers with telecommunication sockets and other devices, both active (switches, routers) as well as passive (patch panel concentrators) of the LAN computer network. Cables meet the requirements in accordance with PN-EN 50173-1, ISO / IEC 11801, ANSI / TIA 568-C.2. Cables classified in accordance with PN-EN 50575 (CPR).