Details

Homepage Products Details

  • Select
  • Control cables
  • Telecommunication cables
  • Fire resistant cables
  • Power cables
  • Mining cables
  • Audio cables
  • Instrumentation cables
  • Fiber cables
  • Accessories
  • Crane cables


Search results
Visualization Description

BiTLAN U/UTP cat.6 LSOH DUPLEX 350MHz

Halogen-free, data transmission cable
Classified according to EN 50575 Indoor application Vertical flame propagation for a single cable (EN 60332-1) Halogen-free (EN 60754) Low smoke emission (EN 61034)

Download:

Technical data:

Basic:

  • Cable type: LAN cable
  • Test voltage: AC 50 Hz: 700V
    DC: 1000V
  • Insulation resistance: 5GΩxkm
  • Capacity: at 1 kHz: 50±5nF/km
Temperature range:
Operating temperature: -30°C to +70°C
Min. installation temp: -10°C
Bending radius: 4xØ
Conductor diameter: 0,54±0,015mm
Insulated core diameter: 0,975±0,05mm
DC loop resistance at 20°C (max): 165Ω/km
Resistance unbalance: ≤2%
Capacitance unbalance at 1kHz (max):
1600pF/km
Nominal voltage: 150V
Characteristic impedance: 100±5Ω
NVP value: 67%
Return loss (min):
f = 4÷10MHz: 20+5lg(f)
f = 10÷20MHz: 25
f = 20÷350MHz: 25-7lg(f/20)

Installation details:

  • Indoor cable
  • Min. installation temperature: -10℃

Environmental resistance:

  • Halogen-free
  • Flame retardance on a single wire

Certificates and approvals:

  • CPR Certificates / DoP

Cable construction:

Basic:

  • Conductor: bare copper conductors
  • Core arrangement: pairs / triples / quads

Application:

BiTLAN U/UTP cat. 6 LSOH DUPLEX cables are applicable to computer networks with operating frequency band up to 350MHz. Suitable for transmission of data, audio and video signals with bitrate up to 1Gb/s. Dedicated for fixed installations within indoor structured cabling systems as per EN 50173-1, ISO/IEC 11801, ANSI/TIA 568-C.2 standards, as well as within industrial networks not exposed to external electromagnetic interferences. Cables with flame retardant LSOH outer sheath ensuring low smoke emission acc. to EN 50268-2, IEC 61034-2 and limited emission of corrosive gases acc. to EN 60754-2, IEC 60754-2. should be installed in places with increased fire safety requirements. Cables classified according to EN 50575 (CPR).


Back