Details

Search results
Visualization Description

BiTLAN S/FTP cat.7A LSOH B2ca 1200 MHz

Halogen-free, data transmission cable, screened
Indoor application Vertical flame propagation for a single cable (EN 60332-1) Vertical flame spread of vertically-mounted bunched cables (EN 60332-3) Halogen-free (EN 60754) Low smoke emission  (EN 61034) Data transmission Classified according to EN 50575

Download:

Technical data:

Basic:

  • Cable type: LAN cable
  • Operating voltage: Not specified
  • Test voltage: 700V AC
    1000V DC
  • Insulation resistance: 2GΩxkm
  • Capacity: 45 ± 5 nF/km
DC loop resistance at 20°C (max): 125Ω/km
Resistance unbalance within a pair: ≤2%
Capacitance unbalance pair to ground at 1kHz (max): 1600pF/km
Characteristic impedance at 100MHz: 100±5Ω

Installation details:

  • Indoor cable

Environmental resistance:

  • Halogen-free
  • Flame retardance on a single wire

Certificates and approvals:

  • CPR Certificates / DoP

Cable construction:

Basic:

  • Conductor: bare copper conductors
  • Screen: aluminium backed polyster tape
  • Core arrangement: pairs / triples / quads

Application:

BiTLAN S/FTP cat. 7A LSOH B2ca cables are applicable to computer networks with operating frequency band up to 1200MHz. Suitable for transmission of data, audio and video signals, with bitrate up to 10Gb/s. Cables meet the requirements of category 7A in 1+1000MHz range for fixed installations within indoor structured cabling systems as per EN 50173-1, ISO/IEC 11801, IEC 61156-5 standards and are tested up to 1200 MHz range (for information purposes). Common and individual shielding of the pairs additionally improves the teletransmission parameters and protects against external electromagnetic interferences and crosstalks between the pairs therefore S/FTP cables can be used in industrial networks. Cables with flame retardant LSOH outer sheath ensuring low smoke emission acc. to EN 50268, IEC 61034-1(2) and limited emission of corrosive gases acc. to EN 50267, IEC 60754-2, should be installed in places with increased fire safety requirements. Cables classified according to EN 50575 (CPR).



Back