Search results
Visualization Description


Fire resistant, halogen free power cable
Industrial application Indoor application Vertical flame propagation for a single cable (EN 60332-1) Vertical flame spread of vertically-mounted bunched cables (EN 60332-3) Halogen-free (EN 60754) Low smoke emission  (EN 61034) 180 min. insulation resistance to fire (IEC 60331) 90 min. circuit integrity (VDE 4102-12) Sprinkler zones


Technical data:


  • Cable type: Power cable
  • Operating voltage: 0,6/1kV
  • Test voltage: 4kV

Operating temperature:

  • Fixed installation: -30℃ do 90℃
Permissible conductor operating temperature: 90°C
Permissible conductor temperature during short circuit: 250°C
Minimum bending radius:
single core cables – 15 x Ø
multi core cables – 12 x Ø

Installation details:

  • Application in sprinkler protected rooms
  • Indoor cable
  • Min. installation temperature: -5℃

Environmental resistance:

  • Halogen-free
  • Flame retardance on a single wire
  • Flame retardance on a bunched wires
  • Fire resistance (acc. to IEC 60331)
  • Fire integrity function (EN 50200, DIN 4102-12)

Certificates and approvals:

  • VDE

Cable construction:


  • Conductor: bare copper conductors
  • Conductor stranding: class 1 or 2 (acc. to EN 60228, IEC 60228)
  • Core arrangement: multi-core cable


Fire resistant power and control cables have E90 fire integrity function which means the assurance of power supply or control under fire conditions for 90 minutes. They are intended for use in buildings with increased fire safety requirements due to high concentration of people, material and cultural assets of high value (sky scrapers, hospitals, shopping centres, tunnels, museums, cinemas, theatres). Cables can be used for power supply or control (lighting, lifts, fire-fighting equipment, pumps). They can be used in fixed installations inside buildings. In case of outdoor application cables should be secured against UV radiation and the external factors. Cables with improved fire characteristic E90 must be installed on the supporting systems tested according to DIN 4102-12