Details

Homepage Products Details

  • Select
  • Control cables
  • Telecommunication cables
  • Fire resistant cables
  • Power cables
  • Mining cables
  • Audio cables
  • Instrumentation cables
  • Fiber cables
  • Accessories
  • Crane cables


Search results
Visualization Description

BiTLAN F/UTP cat.6 LSOH 350MHz

Halogen-free, data transmission cable, screened
Classified according to EN 50575 Indoor application Vertical flame propagation for a single cable (EN 60332-1) Halogen-free (EN 60754) Low smoke emission (EN 61034) Data transmission

Download:

Technical data:

Basic:

  • Cable type: LAN cable
  • Operating voltage: Not specified
  • Test voltage: 700V AC
    1000V DC
  • Insulation resistance: 5 GΩxkm
  • Min. bending radius (fixed installations): 6 x Ø

Operating temperature:

  • Fixed installation: -30℃ do 70℃
DC loop resistance at 20°C (max): 165 Ω/km
Resistance unbalance: ≤2%
Capacitance unbalance at 1kHz (max): max 1600 pF/km
Characteristic impedance: 100 ± 5 Ω

Installation details:

  • Indoor cable
  • Min. installation temperature: -10℃

Environmental resistance:

  • Halogen-free
  • Flame retardance on a single wire

Certificates and approvals:

  • CPR Certificates / DoP

Cable construction:

Basic:

  • Conductor: bare copper conductors
  • Screen: aluminium backed polyster tape
  • Core arrangement: pairs / triples / quads

Application:

BiTLAN F/UTP cat. 6 LSOH cables are applicable to computer networks with operating frequency band up to 350MHz. Suitable for transmission of data, audio and video signals, with bitrate up to 1Gb/s. Additional collective Al/Pet screen with CuSn drain wire acts as a protection against external electromagnetic interferences. Dedicated for fixed installations within indoor structured cabling systems as per EN 50173-1, ISO/IEC 11801, ANSI/TIA 568-C.2 standards, as well as within industrial networks exposed to external electromagnetic interferences. Cables with flame retardant LSOH outer sheath ensuring low smoke emission acc. to EN 50268-2, IEC 61034-2 and limited emission of corrosive gases acc. to EN 60754-2, IEC 60754-2. should be installed in places with increased fire safety requirements. Cables classified according to EN 50575 (CPR).


Back