Details

Homepage Products Details

  • Select
  • Control cables
  • Telecommunication cables
  • Fire resistant cables
  • Power cables
  • Mining cables
  • Audio cables
  • Instrumentation cables
  • Fiber cables
  • Accessories
  • Crane cables


Search results
Visualization Description

BiTLAN F/UTP cat.5e LSOH 200 MHz

Data transmission cable, screened
Classified according to EN 50575 Indoor application Vertical flame propagation for a single cable (EN 60332-1) Halogen-free (EN 60754) Low smoke emission (EN 61034) Data transmission

Download:

Technical data:

Basic:

  • Cable type: LAN cable
  • Operating voltage: Not specified
  • Test voltage: 700V AC
    1000V DC
  • Insulation resistance: 5 GΩxkm
  • Capacity: 50 ± 5 nF/km
  • Min. bending radius (fixed installations): 6 x Ø

Operating temperature:

  • Fixed installation: -30℃ do 70℃
DC loop resistance at 20°C (max): 190 Ω/km
Resistance unbalance: ≤2%
Capacitance unbalance at 1 kHz (max): 1600 pF/km
Characteristic impedance: 100 ± 2 Ω

Installation details:

  • Indoor cable
  • Min. installation temperature: -10℃

Environmental resistance:

  • Halogen-free
  • Flame retardance on a single wire

Certificates and approvals:

  • CPR Certificates / DoP

Cable construction:

Basic:

  • Conductor: bare copper conductors
  • Screen: aluminium backed polyster tape
  • Core arrangement: pairs / triples / quads

Application:

BiTLAN F/UTP cat. 5e LSOH cables are applicable to computer networks with operating frequency band up to 200MHz. Suitable for transmission of data, audio and video signals, with bitrate up to 1Gb/s. Additional collective Al/Pet screen with CuSn drain wire acts as a protection against external electromagnetic interferences. Dedicated for fixed installations within indoor structured cabling systems as per EN 50173-1, ISO/IEC 11801, ANSI/TIA 568-C.2 standards, as well as within industrial networks exposed to external electromagnetic interferences. Cables with flame retardant LSOH outer sheath ensuring low smoke emission acc. to EN 50268-2, IEC 61034-2 and limited emission of corrosive gases acc. to EN 60754-2, IEC 60754-2. should be installed in places with increased fire safety requirements. Cables classified according to EN 50575 (CPR).


Back